LEGO Transparent Treasure Chest Lid 2 x 4 with Thick Hinge (4739)


Lego name: Chest Lid 2 x 4 (Bricks / Special)
View Other Colors
Design ID4739
LDraw ID4739
Item No4129830
BOID115051-97
1989 to 2001
0.6"
 x 
1.3"
 x 
0.5"
In 19 Wishlists
10 Available from US $0.77
Add to Wishlist Comes In Buy
Transparent
Stores
Condition All (10) New (2) Used (Good) (8)
Store Location
Min Quantity
ConditionNameIn StockPricePrice +
Shipping
Store
Used
(Good)
Transparent Treasure Chest Lid 2 x 41US $0.776US $3.07Poland Fabryka Figurek (335)
Shipping   US $2.29
Minimum Order  US $2.55
Used
(Good)
Transparent Treasure Chest Lid 2 x 41US $0.994N/AUnited Kingdom BrechinBricks (86)
Request a Shipping Quote
Used
(Good)
Transparent Treasure Chest Lid 2 x 41US $1.02 US $5.02 United States Makers Construct (1)
Shipping   US $4.00
Minimum Order  US $5.00
Used
(Good)
Transparent Treasure Chest Lid 2 x 41US $1.21US $51.57Germany Rheinstein (48)
Shipping   US $50.36
Used
(Good)
Transparent Treasure Chest Lid 2 x 41US $1.22US $7.26 Hungary PLACCO Worldwide (41)
Shipping   US $6.04
Minimum Order  US $9.22
Used
(Good)
Transparent Treasure Chest Lid 2 x 41US $1.25 US $5.27 United States Aardvark's Bricks (660)
Shipping   US $4.02
Minimum Order  US $3.00
Used
(Good)
Transparent Treasure Chest Lid 2 x 41US $1.29US $12.77Germany X-Brixx (275)
Shipping   US $11.48
Minimum Lot Average  US $0.94
NewTransparent Treasure Chest Lid 2 x 41US $6.49N/AUnited Kingdom Madforit's Market (1035)
Request a Shipping Quote
Used
(Good)
Transparent Treasure Chest Lid 2 x 41US $6.50US $16.69Portugal Forever Sorting (222)
Shipping   US $10.19
Minimum Order  US $117.10
NewTransparent Treasure Chest Lid 2 x 41US $13.02US $23.20Portugal Forever Sorting (222)
Shipping   US $10.19
Minimum Order  US $117.10
LEGO Transparent Treasure Chest Lid 2 x 4 with Thick Hinge has been used in at least 2 LEGO sets over the past 32 years, since it was first used in 1989. You can also find this part in at least 22 other colours, most commonly in Transparent. It has a design ID of 4739 which can usually be found molded into the bottom of the part.